|Page (1) of 1 - 06/21/12||email article||print page|
New SNAP I/O Module From Opto 22 Adds Controller Area Network (CAN) Connectivity to SNAP PAC System(June 21, 2012)
TEMECULA, CA -- (Marketwire) -- 06/21/12 -- Industrial automation manufacturer Opto 22 has released the SNAP-SCM-CAN2B, a high-speed serial communication module for acquiring data from generators, motors, sensors, actuators, and other industrial devices connected to a Controller Area Network (CAN). CAN and CAN-ready devices are popular for use in industrial applications such as factory automation and building control due to the simplicity and low cost of CAN wiring. With the SNAP-SCM-CAN2B module, industrial engineers can incorporate data from CAN devices into their control application just like the analog, digital, and serial I/O signals received from other SNAP I/O modules installed on the I/O rack.
The SNAP-SCM-CAN2B module is used with Opto 22's SNAP PAC System, which includes programmable automation controllers (PACs) and Ethernet-based I/O systems, which are used with PACs as well as with PC-based control applications. The SNAP-SCM-CAN2B has one input for receiving data from devices on a CAN network; this module does not transmit. Like all Opto 22 SNAP I/O modules, the SNAP-SCM-CAN2B is optically isolated from the equipment and devices it connects to, as well as from other modules on a shared I/O rack.
To use the SNAP-SCM-CAN2B module in a control application, the Opto 22 CAN Integration Kit for PAC Project (Part # PAC-INT-CAN) provides an example strategy to enable an Opto 22 PAC system equipped with one or more SNAP-SCM-CAN2B modules to receive data from devices on a CAN protocol network. The integration kit supports CAN protocols J1939, NMEA 2000, and ISO 11783. The Opto 22 CAN Integration Kit for PAC Project can be downloaded at no cost from the Opto 22 website.
The SNAP-SCM-CAN2B is available now at a list price of $295.00 USD each. For more information, download the SNAP-SCM-CAN2B datasheet (form #1537) from the Opto 22 website at op22.co/MapTGe or contact Opto 22 Pre-Sales at 951-695-3000 or toll free at 1-800-321-6786.
About Opto 22
Opto 22 develops and manufactures hardware and software for applications involving industrial automation and control, energy management, remote monitoring, and data acquisition. Designed and made in the U.S.A., Opto 22 products have an established reputation worldwide for ease-of-use, innovation, quality, and reliability. Opto 22 products, which use standard, commercially available networking and computer technologies, are used by automation end-users, OEMs, and information technology and operations personnel in over 10,000 installations worldwide. The company was founded in 1974 and is privately held in Temecula, California, U.S.A. Opto 22 products are available through a global network of distributors and system integrators. For more information, contact Opto 22 headquarters at +1-951-695-3000 or visit www.opto22.com.
Electronic copies of this release and related photographs are available at http://www.opto22.com/site/pressroom.aspx
Copyright @ Marketwire
Related Keywords: Opto 22, Office Equipment,Applications,Shipping & Receiving,Sales & Marketing,Networking,Hardware,Connectivity,Management,USA,Marketwire,IT (Information Technology),Networking,Computer Science,Other,