|Page (1) of 1 - 01/24/12||email article||print page|
Carbon Design Systems Posts Record SalesMomentum Driven by System-Level Solutions for ARM's Cortex IP Family (January 24, 2012)
ACTON, MA -- (Marketwire) -- 01/24/12 -- Carbon Design Systems announced today that it closed calendar year 2011, recording its fifth consecutive year of growth driven by its leading virtual prototyping solutions for architects and firmware teams using the ARM® Cortex intellectual property (IP) family.
"We solidified our leadership position in 2011 by helping architects optimize performance and cost," affirms Rick Lucier, Carbon's president and chief executive officer. "Firmware teams throughout the world now rely on Carbon to help debug system-level problems prior to tapeout, ensuring their firmware runs on silicon the first day back in the lab."
Rapid adoption of advanced IP, such as the ARM Cortex A15, Cortex R5, Cortex A7, and Cortex A9, has increased demand for Carbon's 100% accurate system-level models for these platforms from Carbon IP Exchange, a web-based model portal. In 2011, Carbon IP Exchange grew to more than 400 registered users who have downloaded more than 2,500 models for virtual prototyping of their SoC designs.
During 2011, Carbon added Mentor Graphics and CEVA as Carbon IP Exchange partners to complement its existing partners: ARM, Cadence Design Systems, Elliptic Technologies, MIPS Technologies, Tensilica, VeriSilicon and Vivante Corporation. A TLM-2.0 solution for the AMBA® protocol for modeling with SystemC TLM2-0 was also added to Carbon IP Exchange at no charge.
Aided by Carbon's Swap n' Play solution, the adoption of SoC Designer Plus continues to expand and address the needs of the firmware developer. Swap n' Play works in conjunction with ARM Fast Models allowing engineers to boot any operating system within seconds on a virtual prototype and rapidly develop and debug system software. When more accuracy is required, either to debug a system issue, develop a piece of driver code or perform accurate profiling, the system can dynamically swap to an equivalent, 100% accurate representation. This approach gives design teams a way to leverage a single virtual platform for a variety of use cases.
About Carbon Design Systems
Carbon Design Systems offers the industry's only unified virtual prototype solution along with the leading solution for accurate IP model creation. Carbon virtual platforms can execute at 100s of MIPS and with 100% accuracy to enable application software development, detailed architectural analysis and secure IP model distribution. Carbon's solutions are based on open industry standards, including SystemC, IP-XACT, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on wireless, networking, and consumer electronics. Carbon Design Systems is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone: (978) 264-7300. Facsimile: (978) 264-9990. Email: email@example.com. Website: www.carbondesignsystems.com.
Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.
For more information, contact:
Vice President of Business Development
Carbon Design Systems
Copyright @ Marketwire
Related Keywords: Carbon Design Systems, Family, Family, Digital Media Software, Graphics/Image Editing, Sales, Sales & Marketing, Networking, Business Issues, Software Development, Platforms, Sales, Sales, Marketwire, Inc., , Application Software, Consumer Electronics, Computer Science, Business, Family, Other,